The TNFR1 Antagonist Atrosimab Is Therapeutic in Mouse Models of Acute and Chronic Inflammation.

Therapeutics that block tumor necrosis factor (TNF), and thus activation of TNF receptor 1 (TNFR1) and TNFR2, are clinically used to treat inflammatory diseases such as rheumatoid arthritis, inflammatory bowel disease and psoriasis. However, TNFR1 and TNFR2 work antithetically to balance immune responses involved in inflammatory diseases. In particular, TNFR1 promotes inflammation and tissue degeneration, whereas TNFR2 contributes to immune modulation and tissue regeneration. We, therefore, have developed the monovalent antagonistic anti-TNFR1 antibody derivative Atrosimab to selectively block TNFR1 signaling, while leaving TNFR2 signaling unaffected. Here, we describe that Atrosimab is highly stable at different storage temperatures and demonstrate its therapeutic efficacy in mouse models of acute and chronic inflammation, including experimental arthritis, non-alcoholic steatohepatitis (NASH) and experimental autoimmune encephalomyelitis (EAE). Our data support the hypothesis that it is sufficient to block TNFR1 signaling, while leaving immune modulatory and regenerative responses via TNFR2 intact, to induce therapeutic effects. Collectively, we demonstrate the therapeutic potential of the human TNFR1 antagonist Atrosimab for treatment of chronic inflammatory diseases.

Superior Treg-Expanding Properties of a Novel Dual-Acting Cytokine Fusion Protein.

Autoimmune diseases are caused by uncontrolled endogenous immune responses against healthy cells. They may develop due to an impaired function of regulatory T cells (Tregs), which normally suppress self-specific effector immune cells. Interleukin 2 (IL-2) and tumor necrosis factor (TNF) have been identified as key players that promote expansion, function, and stability of Tregs. In vivo, both low-dose IL-2 therapy and TNF receptor 2 (TNFR2) agonism were shown to expand Tregs and alleviate autoimmunity. We here designed a novel dimeric dual-acting fusion cytokine, where mouse IL-2 is genetically linked to a TNFR2-selective single-chain TNF mutein (IL2-EHD2-sc-mTNFR2). IL2-EHD2-sc-mTNFR2 showed high affinity to TNFR2 and efficiently activated IL-2 and TNFR2-selective signaling pathways. Further, IL2-EHD2-sc-mTNFR2 promoted superior Treg expansion, with both the IL-2 and the TNFR2 agonist (sc-mTNFR2) component necessary for this biological response. Ultimately, we propose that IL2-EHD2-sc-mTNFR2 is a dual-acting cytokine that efficiently promotes Treg expansion and might have a superior therapeutic window than conventional IL-2-based drugs.

Application of machine learning algorithms for multiparametric MRI-based evaluation of murine colitis.

Magnetic resonance imaging (MRI) allows non-invasive evaluation of inflammatory bowel disease (IBD) by assessing pathologically altered gut. Besides morphological changes, relaxation times and diffusion capacity of involved bowel segments can be obtained by MRI. The aim of this study was to assess the use of multiparametric MRI in the diagnosis of experimentally induced colitis in mice, and evaluate the diagnostic benefit of parameter combinations using machine learning. This study relied on colitis induction by Dextran Sodium Sulfate (DSS) and investigated the colon of mice in vivo as well as ex vivo. Receiver Operating Characteristics were used to calculate sensitivity, specificity, positive- and negative-predictive values (PPV and NPV) of these single values in detecting DSS-treatment as a reference condition. A Model Averaged Neural Network (avNNet) was trained on the multiparametric combination of the measured values, and its predictive capacity was compared to those of the single parameters using exact binomial tests. Within the in vivo subgroup (n = 19), the avNNet featured a sensitivity of 91.3% (95% CI: 86.6-96.0%), specificity of 92.3% (95% CI: 85.1-99.6%), PPV of 96.9% (94.0-99.9%) and NPV of 80.0% (95% CI: 69.9-90.1%), significantly outperforming all single parameters in at least 2 accuracy measures (p < 0.003) and performing significantly worse compared to none of the single values. Within the ex vivo subgroup (n = 30), the avNNet featured a sensitivity of 87.4% (95% CI: 82.6-92.2%), specificity of 82.9% (95% CI: 76.1-89.7%), PPV of 88.9% (84.3-93.5%) and NPV of 80.8% (95% CI: 73.8-87.9%), significantly outperforming all single parameters in at least 2 accuracy measures (p < 0.015), exceeded by none of the single parameters. In experimental mouse colitis, multiparametric MRI and the combination of several single measured values to an avNNet can significantly increase diagnostic accuracy compared to the single parameters alone. This pilot study will provide new avenues for the development of an MR-derived colitis score for optimized diagnosis and surveillance of inflammatory bowel disease.

BATF-dependent IL-7RhiGM-CSF+ T cells control intestinal graft-versus-host disease.

Acute graft-versus-host disease (GVHD) represents a severe, T cell-driven inflammatory complication following allogeneic hematopoietic cell transplantation (allo-HCT). GVHD often affects the intestine and is associated with a poor prognosis. Although frequently detectable, proinflammatory mechanisms exerted by intestinal tissue-infiltrating Th cell subsets remain to be fully elucidated. Here, we show that the Th17-defining transcription factor basic leucine zipper transcription factor ATF-like (BATF) was strongly regulated across human and mouse intestinal GVHD tissues. Studies in complete MHC-mismatched and minor histocompatibility-mismatched (miHA-mismatched) GVHD models revealed that BATF-expressing T cells were functionally indispensable for intestinal GVHD manifestation. Mechanistically, BATF controlled the formation of colon-infiltrating, IL-7 receptor-positive (IL-7R+), granulocyte-macrophage colony-stimulating factor-positive (GM-CSF+), donor T effector memory (Tem) cells. This T cell subset was sufficient to promote intestinal GVHD, while its occurrence was largely dependent on T cell-intrinsic BATF expression, required IL-7-IL-7R interaction, and was enhanced by GM-CSF. Thus, this study identifies BATF-dependent pathogenic GM-CSF+ effector T cells as critical promoters of intestinal inflammation in GVHD and hence putatively provides mechanistic insight into inflammatory processes previously assumed to be selectively Th17 driven.

High-affinity tags fused to s-layer proteins probed by atomic force microscopy.

Two-dimensional, crystalline bacterial cell surface layers, termed S-layers, are one of the most commonly observed cell surface structures of prokaryotic organisms. In the present study, genetically modified S-layer protein SbpA of Bacillus sphaericus CCM 2177 carrying the short affinity peptide Strep-tag I or Strep-tag II at the C terminus was used to generate a 2D crystalline monomolecular protein lattice on a silicon surface. Because of the genetic modification, the 2D crystals were addressable via Strep-tag through streptavidin molecules. Atomic force microscopy (AFM) was used to investigate the topography of the single-molecules array and the functionality of the fused Strep-tags. In high-resolution imaging under near-physiological conditions, structural details such as protein alignment and spacing were resolved. By applying molecular recognition force microscopy, the Strep-tag moieties were proven to be fully functional and accessible. For this purpose, streptavidin molecules were tethered to AFM tips via approximately 8-nm-long flexible polyethylene glycol (PEG) linkers. These functionalized tips showed specific interactions with 2D protein crystals containing either the Strep-tag I or Strep-tag II, with similar energetic and kinetic behavior in both cases.

S-layers as a tool kit for nanobiotechnological applications.

Crystalline bacterial cell surface layers (S-layers) have been identified in a great number of different species of bacteria and represent an almost universal feature of archaea. Isolated native S-layer proteins and S-layer fusion proteins incorporating functional sequences self-assemble into monomolecular crystalline arrays in suspension, on a great variety of solid substrates and on various lipid structures including planar membranes and liposomes. S-layers have proven to be particularly suited as building blocks and patterning elements in a biomolecular construction kit involving all major classes of biological molecules (proteins, lipids, glycans, nucleic acids and combinations of them) enabling innovative approaches for the controlled 'bottom-up' assembly of functional supramolecular structures and devices. Here, we review the basic principles of S-layer proteins and the application potential of S-layers in nanobiotechnology and biomimetics including life and nonlife sciences.

Heterotetramers formed by an S-layer-streptavidin fusion protein and core-streptavidin as a nanoarrayed template for biochip development.

Based on the S-layer protein SbpA of Bacillus sphaericus CCM 2177, an S-layer-streptavidin fusion protein was constructed. After heterologous expression, isolation of the fusion protein, and refolding, functional heterotetramers were obtained that had retained the ability to recrystallize into the square-lattice structure on plain gold chips and on gold chips precoated with secondary cell wall polymer (SCWP), which is the natural anchoring molecule for the S-layer protein in the bacterial cell wall. Monolayers generated by recrystallization of heterotetramers on plain gold chips or on gold chips precoated with thiolated SCWP were exploited for the binding of biotinylated oligonucleotides (30-mers). Hybridization experiments with complementary fluorescently labeled oligonucleotides carrying one mismatch or no mismatch (both 15-mers) were performed and evaluated with surface-plasmon-field-enhanced fluorescence spectroscopy. For surfaces generated by the recrystallization of heterotetramers on SCWP-coated gold chips, a detection limit of 1.57 pM could be determined, whereas for surfaces obtained by direct recrystallization of heterotetramers on plain gold chips, a detection limit of 8.2 pM was found. Measuring the association and dissociation processes of oligonucleotides carrying no mismatch led to a dissociation constant of K(D)=6.3 x 10(-10) m, whereas for oligonucleotides carrying one mismatch a dissociation constant of K(D)=7.9 x 10(-9) m was determined. This finding was confirmed by measuring the whole Langmuir isotherm, which resulted in a dissociation constant of K(D)=2.6 x 10(-8) m.

The three S-layer-like homology motifs of the S-layer protein SbpA of Bacillus sphaericus CCM 2177 are not sufficient for binding to the pyruvylated secondary cell wall polymer.

The S-layer protein SbpA of Bacillus sphaericus CCM 2177 recognizes a pyruvylated secondary cell wall polymer (SCWP) as anchoring structure to the peptidoglycan-containing layer. Data analysis from surface plasmon resonance (SPR) spectroscopy revealed the existence of three different binding sites with high, medium and low affinity for rSbpA on SCWP immobilized to the sensor chip. The shortest C-terminal truncation with specific affinity to SCWP was rSbpA(31-318). Surprisingly, rSbpA(31-202) comprising the three S-layer-like homology (SLH) motifs did not bind at all. Analysis of the SbpA sequence revealed a 58-amino-acid-long SLH-like motif starting 11 amino acids after the third SLH motif. The importance of this motif for reconstituting the functional SCWP-binding domain was further demonstrated by construction of a chimaeric protein consisting of the SLH domain of SbsB, the S-layer protein of Geobacillus stearothermophilus PV72/p2 and the C-terminal part of SbpA. In contrast to SbsB or its SLH domain which did not recognize SCWP of B. sphaericus CCM 2177 as binding site, the chimaeric protein showed specific affinity. Deletion of 213 C-terminal amino acids of SbpA had no impact on the square (p4) lattice structure, whereas deletion of 350 amino acids was linked to a change in lattice type from square to oblique (p1).

Interaction of the crystalline bacterial cell surface layer protein SbsB and the secondary cell wall polymer of Geobacillus stearothermophilus PV72 assessed by real-time surface plasmon resonance biosensor technology.

The interaction between S-layer protein SbsB and the secondary cell wall polymer (SCWP) of Geobacillus stearothermophilus PV72/p2 was investigated by real-time surface plasmon resonance biosensor technology. The SCWP is an acidic polysaccharide that contains N-acetylglucosamine, N-acetylmannosamine, and pyruvic acid. For interaction studies, recombinant SbsB (rSbsB) and two truncated forms consisting of either the S-layer-like homology (SLH) domain (3SLH) or the residual part of SbsB were used. Independent of the setup, the data showed that the SLH domain was exclusively responsible for SCWP binding. The interaction was found to be highly specific, since neither the peptidoglycan nor SCWPs from other organisms nor other polysaccharides were recognized. Data analysis from that setup in which 3SLH was immobilized on a sensor chip and SCWP represented the soluble analyte was done in accordance with a model that describes binding of a bivalent analyte to a fixed ligand in terms of an overall affinity for all binding sites. The measured data revealed the presence of at least two binding sites on a single SCWP molecule with a distance of about 14 nm and an overall Kd of 7.7 x 10(-7) M. Analysis of data from the inverted setup in which the SCWP was immobilized on a sensor chip was done in accordance with an extension of the heterogeneous-ligand model, which indicated the existence of three binding sites with low (Kd = 2.6 x 10(-5) M), medium (Kd = 6.1 x 10(-8) M), and high (Kd = 6.7 x 10(-11) M) affinities. Since in this setup 3SLH was the soluble analyte and the presence of small amounts of oligomers in even monomeric protein solutions cannot be excluded, the high-affinity binding site may result from avidity effects caused by binding of at least dimeric 3SLH. Solution competition assays performed with both setups confirmed the specificity of the protein-carbohydrate interaction investigated.

Biophysical characterization of the entire bacterial surface layer protein SbsB and its two distinct functional domains.

The crystalline bacterial cell surface layer (S-layer) protein SbsB of Geobacillus stearothermophilus PV72/p2 was dissected into an N-terminal part defined by the three consecutive S-layer homologous motifs and the remaining large C-terminal part. Both parts of the mature protein were produced as separate recombinant proteins (rSbsB(1-178) and rSbsB(177-889)) and compared with the full-length form rSbsB(1-889) (rSbsB). Evidence for functional and structural integrity of the two truncated forms was provided by optical spectroscopic methods and electron microscopy. In particular, binding of the secondary cell wall polymer revealed a high affinity dissociation constant of 3 nm and could be assigned solely to the soluble rSbsB(1-178), whereas rSbsB(177-889) self-assembled into the same lattice as the full-length protein. Furthermore, thermal as well as guanidinium hydrochloride induced equilibrium unfolding profiles monitored by intrinsic fluorescence, and circular dichroism spectroscopy allowed characterization of rSbsB(1-178) as an alpha-helical protein with a single cooperative unfolding transition yielding a DeltaG value of 26.5 kJ mol(-1). The C-terminal rSbsB(177-889) could be characterized as a beta-sheet protein with typical multidomain unfolding, which is partially less stable as stand-alone protein. In general, the truncated forms showed identical properties compared with the full-length rSbsB with respect to structure and function. Consequently, rSbsB is characterized by its two functionally and structurally separated parts, the specific secondary cell wall polymer binding rSbsB(1-178) and the larger rSbsB(177-889) responsible for formation of the crystalline array.

S-layer-streptavidin fusion proteins as template for nanopatterned molecular arrays.

Biomolecular self-assembly can be used as a powerful tool for nanoscale engineering. In this paper, we describe the development of building blocks for nanobiotechnology, which are based on the fusion of streptavidin to a crystalline bacterial cell surface layer (S-layer) protein with the inherent ability to self-assemble into a monomolecular protein lattice. The fusion proteins and streptavidin were produced independently in Escherichia coli, isolated, and mixed to refold and purify heterotetramers of 1:3 stoichiometry. Self-assembled chimeric S-layers could be formed in suspension, on liposomes, on silicon wafers, and on accessory cell wall polymer containing cell wall fragments. The two-dimensional protein crystals displayed streptavidin in defined repetitive spacing, and they were capable of binding d-biotin and biotinylated proteins. Therefore, the chimeric S-layer can be used as a self-assembling nanopatterned molecular affinity matrix to arrange biotinylated compounds on a surface. In addition, it has application potential as a functional coat of liposomes.

Analysis of the structure-function relationship of the S-layer protein SbsC of Bacillus stearothermophilus ATCC 12980 by producing truncated forms.

The mature surface layer (S-layer) protein SbsC of Bacillus stearothermophilus ATCC 12980 comprises amino acids 31-1099 and self-assembles into an oblique lattice type which functions as an adhesion site for a cell-associated high-molecular-mass exoamylase. To elucidate the structure-function relationship of distinct segments of SbsC, three N- and seven C-terminal truncations were produced in a heterologous expression system, isolated, purified and their properties compared with those of the recombinant mature S-layer protein rSbsC(31-1099). With the various truncated forms it could be demonstrated that the N-terminal part (aa 31-257) is responsible for anchoring the S-layer subunits via a distinct type of secondary cell wall polymer to the rigid cell wall layer, but this positively charged segment is not required for the self-assembly of SbsC, nor for generating the oblique lattice structure. If present, the N-terminal part leads to the formation of in vitro double-layer self-assembly products. Affinity studies further showed that the N-terminal part includes an exoamylase-binding site. Interestingly, the N-terminal part carries two sequences of 6 and 7 aa (AKAALD and KAAYEAA) that were also identified on the amylase-binding protein AbpA of Streptococcus gordonii. In contrast to the self-assembling N-terminal truncation rSbsC(258-1099), two further N-terminal truncations (rSbsC(343-1099), rSbsC(447-1099)) and three C-terminal truncations (rSbsC(31-713), rSbsC(31-844), rSbsC(31-860)) had lost the ability to self-assemble and stayed in the water-soluble state. Studies with the self-assembling C-terminal truncations rSbsC(31-880), rSbsC(31-900) and rSbsC(31-920) revealed that the C-terminal 219 aa can be deleted without interfering with the self-assembly process, while the C-terminal 179 aa are not required for the formation of the oblique lattice structure.